Double Glazing Seal Repairs
If the seals of double glazing windows are broken they can lead to damp and mould. This can cause damage to the frame and the walls surrounding it, as well as impacting your health.
Resealing is a cheaper way to repair most uPVC window frames than to replace them. A glazier will typically clean the frame of the window and the glass and then apply a new layer of sealant and smooth it.
Water Leaks
Window seals are designed to keep moisture out of your home. As they wear out, water can leak around your windows. A window that leaks isn't only a nuisance but can cause serious damage to the structure of your home. It is crucial to spot the issue early and get it fixed by an expert before it gets worse.
Most of the time, the cause of your windows that leak is not the glass itself but rather on the frame and sill. This is the most typical sign of a leaky seal. This can be due to damage to the seal due to weather or age, worn out caulking or even a blocked drain which can lead to the accumulation of ice or water.
Water that is visible between the double-glazed panes can be a indication that your window seal has failed. Although, this isn't as dangerous as a leak because the water doesn't travel far enough to get into your home. It does mean, however that the inert gases that are encased between your panes have escaped out. This will reduce the insulation value of your window.
Condensation between the panes is another typical indication of a damaged seal. It could be due to the seal being damaged or a damp environment within your home. It could also be due to a problem with the glass. The condensation might not just be a nuisance, but it could also cause the development of mildew and mould in your home which can be very difficult and expensive to remove.
If you are seeing these signs, it's time for an examination of your double-glazed windows. A repair or replacement will ensure your home is protected from water leaks, cut down on energy costs, and even prevent draughts. It's a small cost to pay for the security and comfort of your family. Contact Thompson Creek Window today to discuss your options for window seal repair or replacement. Our experts are always available to assist you! We serve homeowners in the Mid-Atlantic.
Condensation
A broken double glazing seal could allow water to enter the gap between the insulating elements. This water can cause fogging or misting to the window panes.
If you notice condensation inside your home, it's time to contact a double glazing repair company. The condensation could be a sign that the vacuum seal created by the factory was not working and moisture has entered into the insulation.
Condensation can be caused by a number of reasons, but it is typically the result of gaskets that are not properly fitted or sealants, or insulation in the uPVC frame of the windows. As a result, there are a few different double glazing repair options but it is essential that the seal you choose to replace is properly sized to ensure an ideal fit and a water-tight seal.
Typically gaskets used to fill in the gaps between your double-glazed units are made from polyurethane foam. These are designed to last a long time but they can perish in time because of wear and tear as well as exposure to different temperatures and weather conditions throughout the year.
Over time the foam may shrink or crack and this causes a break in the seal which allows moisture to creep into those areas of your double-glazed windows. This can cause condensation and a loss in energy efficiency.
Re-sealing windows is one way to fix this problem. This is not a guaranteed fix as it will only remove the existing condensation and not address the issues that are causing the double-glazed windows to leak or develop condensate.
Another solution is to replace your windows completely. This should be handled by a professional who provides an insurance backed guarantee. This means that in the event that the company fails or is shut down, you'll remain covered by the insurance. It's important to note that the warranty for your replacement windows should be at least 10 years.
Misting
Verify that your double-glazing seals are in good condition as the fall season approaches. Worn-out window seals are not just detrimental to the insulation properties of your windows, but can also lead to damp, mold and condensation. It is crucial to fix any issues with your double-glazed windows as quickly as you can to prevent further damage and save money on energy costs.
A typical double-glazed window is made from two panes of glass connected by an internal space that's filled with gas. A layer of sealant on the outside fills the gap between the uPVC frame and the glass. This is vital to ensure the air-tight seal that keeps cold and warm air from your home, thereby saving the cost of heating. These seals are susceptible to damage over time due to the weather, aging, or improper installation. The magic insulation formula which makes double-glazed windows so efficient could begin to lose its effectiveness when this occurs.
If not checked leaks, damaged seals, or other issues can cause damp and condensation which can ruin the appearance of your windows, but could also affect your health. Dampness and moisture can cause damage to ceilings, walls, floors and other surfaces within your home. They can also cause allergens and irritants that are harmful to your health and the health of your family.
The most common problem that double glazing suffers from is misting that occurs between the panes. This occurs when moisture gets into that insulated section of your window. It is very difficult to fix without professional double glazing seal repair.
There are DIY ways to deal with this problem, however, we'd recommend against this because it's not just risky but also very messy and destructive to your windows. These methods involve drilling holes in your glazed units and using chemicals to get rid of the fog and condensation. This could cause a number of problems, such as exposure of your windows and units to water damage.
Professional glaziers have the skills, tools and experience needed to safely reseal your uPVC frames and provide you with lasting results. Not to mention, they can also offer advice on the best ways to keep your uPVC windows in good shape to prevent any future problems.
Draughts
A window that is draughty is a sign that the sealant has probably broken down and needs to be repaired or replaced. This will prevent cold air from getting into your home. It will also increase the efficiency of your energy, reduce heating bills, and increase the comfort.
double glazing window repairs is important to remember that a few draughts aren't caused by the window seals but rather from the gap between the frame of the bricks. In some instances it is possible to fix this by simply filling the gap with silicone caulking. If this is not successful it will require resealing professionally.
If the sealant around windows with double glazing begins to degrade and allow water ingress and can cause dampness or even mold in some instances. This can affect health and cause damage to property. It is important to address any water ingress problems as soon as you spot them. If your windows are still under guarantee it is worth contacting the company you bought windows from, as they might cover the cost of the repairs.
The windows themselves are usually covered by a warranty that can last at least 10 years However, certain businesses offer lifetime warranties - therefore it is worthwhile looking into this information. If your double glazing is under warranty, it's worth contact the company you bought them from as soon as you can and giving them the details of any issues you are having. Ideally, it is best to do this in person or via email and letter, so everything is documented and clear.
It is important to note that draughts can often be caused by damaged hinges rather than an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiff in time if not regularly oiled. This could leave gaps between the sash and the frame and let cold air in. Replacing the hinges will fix this issue without affecting window seals.